20% OFF

TEI Spa OxyDerm PRO High Frequency Tool

20% OFF Introductory Offer

TEI SPA OxyDerm PRO - Cleansing tool for face and body (Portable,  wireless with USB rechargeable)
- Improves blood circulation & accelerates healing
- Remove toxins & kill P. acnes bacteria
- Reduce the size of pores
- Prevent the overproduction of sebum
- Reduce inflammation and redness

In stock

Loading...
timer

Shipped Same Day if Ordered Before 15:45 GMT (Mon to Fri)

Description

TEI SPA OxyDerm PRO  - Cleansing tool for face and body

High Frequency is a popular skincare technique that is used to treat a variety of conditions, including acne management, enlarged pores, fine lines and wrinkles, and puffy or dark eyes.

glass high frequency electrode is the common component of all high frequency facial machines and is used to treat diverse body and facial features. little electrical current flows through the glass electrode packed with neon or argon gas when it is applied to the skin, giving it slight glow and buzzing sound. The electrodes emit either neon red/orange or violet/blue light, depending on the inert gas they are filled with. Violet is typically used to treat acne prone skin, while red is typically used to cure ageing skin. However, new research have shown that both are equally beneficial regardless of the skincare condition

Enriched oxygen molecules are created during the high frequency treatment, acting as an antibacterial and warming the tissue in a "natural" way. In addition to providing your skin cells with nutrients and moisturising volume, this process aids in the removal of toxins from your blood vessels. As a result, blood circulation and cell regeneration are boosted, supporting higher amounts of collagen and elastin. After just one treatment, the skin feels immediately energised and considerably softer.

The difference with OxyDerm & OxyDerm PRO?

The OxyDerm and the OxyDerm Pro use the exact same high frequency technology to provide identical results. There are two main differences in these two versions of the tool. The OxyDerm is a
plug in tool that must be inserted into an outlet in order to work. Whereas, the OxyDerm Pro is a rechargable tool that can be charged and then used on the go without the need for a power source

In addition, the OxyDerm's high frequency generator produces a mild zapping sound and very mild shock feeling that is somewhat intimidating to certain users. On the other hand, the OxyDerm Pro
was designed with a lower sound as well as a lack of the shock feeling in order to be more user friendly.

OxyDerm PRO

- New innovation and design
- Portable high-frequency
- It is wireless with USB rechargeable
- Built with patented unbreakable glass

Benefits:

  • After Shaving - reduce annoying razor clogs and soothe breakouts and nicks.

  • After Waxing -Keep skin smooth, soft, and free from bumps and ingrown hairs.

  • After Facial Threading - Ease imitations, rashes, and redness. Prevent breakouts and pimples.

  • Treating Acne - Sterilize skin and kill acne-causing bacteria.

  • Treating Skin Tag & Bug Bits - Helps to reduce the size of skin tags. Relief sting and itchiness from bug bits. 

  • Esthetician's Favorite Tool - Helps minimize the pore and deep cleansing after extraction, micro-needling, and chemical peel. 

 

Directions:


*REMOVE CLEAR PROTECTIVE CAP*
1/ POWER ON/OFF: - Press and hold the power button for 3 seconds until light turns on. To turn off power press and hold the power button for 3 seconds until lights off.

2/SELECT/PRESS MODE: - Press power strength mode button to change the frequency levels from low (2 bars), medium (4 bars) to high (6 bars). Press again and then back to low. It can be repeat this cycle.                                 

3/THEN SELECT PRESET TIMER: - Press the timer button to select 4 different setting 1 min, 3 mins and 10 mins for the treatment. After each treatment the device will create sounds “bi bi bi” then the device will turn off by itself.

4/TO START & ACTOVATE: After set up strength and timer then press power activator button to start. The signal bars will start flashing on LCD screen it means the device is ready to work.

5/For Oily Skin: Use daily, or as needed, such area on T-zone and U-zone for 3 mins.

6/For Combination Skin: Use 3-4 times per week, or as needed. Focus use on oily areas and use minimally on sensitive areas for 1 min.

7/For Dry Skin: Use 2-3 times per week, or as needed, less than 1 minute.

8/For Body: Use 10-15 mins to treat around Arms, Legs, Back of Body for blemishes skin. 

9/Treat the Chest & Neck by using device in stroll motions for 10 minutes. It is an ideal for treatment such as redness, irritation, and sensitivity on the body.

10/ OXYDERM PRO is one tool suitable for the entire family. For mam after shaving, for woman after waxing, for teen for acne skin.

 

The device would not work if the strength mode or timer is not set up.

While the battery voltage is insufficient, the LCD screen shows that the battery is low or has no power. Please recharge the battery for one or two hours.  
When fully charged, the LCD screen shows that the battery is fully charged.
 
Warning:
This tool is not waterproof. Do not use or store this device in a wet or moist area.
Clean the tool after used with alcohol wipes then place the cap.
The machine is prohibited to repair, disassemble or refit by yourself. Any tamper of the device, it is not part of warranty coverage.
Do not use the device on wounds or inflamed skin. Stop use and consult your doctor if you feel hot, uncomfortable or if redness occurs.
If the ozone head has cracks, please stop using it.
 
Don't use if:
  • if you are pregnant, nursing or menstruating;
  • if you suffer from severe or cystic acne;
  • if you have recently undergone a cosmetic procedure, had an acid peel or used Accutane over the past 30 days; had skin grafting or metal material transplant
  • if you have metal braces
  • if you use a pacemaker or have a battery-operated heart pump; have a history of heart disease; have high blood pressure;
  • have internal ulcers, tumors, cerebral embolism, or skin diseases such as herpes, skin cancer, general lupus, erythematous, etc.
  • with any metal object on or around the treatment area. Keep the tool at least 3 feet away from electrical devices
  • around the abdominal region if you use an intrauterine contraceptive ring

 

1 WHITE USB CABLE: FOR RECHARGING

Max. Power: 1.2W

Charging current: ≤500mA

Charging time: 2-3 hours

Lithium battery: DC3.7V/850mAh

Ingredients

Coming soon ...

Video